arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 1001.2047

Phase Noise in RF and Microwave Amplifiers

Rodolphe Boudot·Enrico Rubiola
View original source ↗Read source document ↗Export metadata ↓

Abstract

Understanding the amplifier phase noise is a critical issue in numerous fields of engineering and physics, like oscillators, frequency synthesis, telecommunications, radars, spectroscopy, in the emerging domain of microwave photonics, and in more exotic domains like radio astronomy, particle accelerators, etc. This article analyzes the two main types of phase noise in amplifiers, white and flicker. White phase noise results from adding white noise to the RF spectrum around the carrier. For a given amount of RF noise added, noise is proportional to the inverse of the carrier power. By contrast, the 1/f coefficient is a constant parameter of the amplifier, in a wide range of carrier power. This fact has amazing consequences on different amplifier topologies. Connecting m equal amplifiers in parallel, flicker is 1/m times that of one device. Cascading m equal amplifiers, flicker is m times that of one amplifier. Recirculating the signal in an amplifier so that the gain increases by a power of m (a factor of m in dB) due to positive feedback (regeneration), which for integer m is similar to the case of m amplifiers, we find that flicker is m^2 times that of the amplifier alone. Starting from the fact that near-dc flicker exists in all electronic devices, although generally not accessible from outside, the simplest model for the 1/f phase noise is that the near-dc 1/f noise phase-modulates the carrier through some parametric effect in the semiconductor. This model predicts the behavior of the (simple) amplifier and of the different amplifier topologies. Numerous measurements on amplifiers from different technologies and frequencies (HF to microwaves), also including some obsolete amplifiers, validate the theory.

Explore related subjects

physics.ins-detphysics.optics

Keep this discovery

BibTeXRIS

Rodolphe Boudot, Enrico Rubiola. 2012-01-31. Phase Noise in RF and Microwave Amplifiers. https://arxiv.org/abs/1001.2047

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗