arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 0812.4507

Mossbauer Experiment in a Rotating System on the Time Dilation Effect

Alexander L. Kholmetskii·Tolga Yarman·Oleg V. Missevitch·Boris I. Rogozev
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present results of Moessbauer experiment in a rotating system, which is induced by our recent disclosure (Phys. Scr., 77 (2008) 035302) and which consisted in the fact that a correct processing of Kundig experiment data on the subject gives an appreciable deviation of a relative energy shift dE/E between emission and absorption resonant lines from the standard prediction based on the relativistic dilation of time (that is dE/E=-v2/2c2 to the accuracy c-2, where v is the tangential velocity of absorber of resonant radiation, and c is the light velocity in vacuum). Namely, the Kundig result following the correction we brought to it, is dE/E=-(0.596+/-0.006)v2/c2. In our own experiment we carried out measurements for two absorbers with substantially different isomer shift, which allowed us to make a correction of Moessbauer data to a level of vibrations in the rotor system at various rotational frequencies. As a result we got the estimation dE/E=-(0.68+/-0.03)v2/c2. A deviation from the relativistic formula is discussed.

Explore related subjects

physics.class-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alexander L. Kholmetskii, Tolga Yarman, Oleg V. Missevitch, Boris I. Rogozev. 2008-12-24. Mossbauer Experiment in a Rotating System on the Time Dilation Effect. https://arxiv.org/abs/0812.4507

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Contact mechanics and friction of soft materials: an apparatus combining multi-axes dynamical actuation/measurement and in situ/in operando visualisation

The mechanics and friction of contact interfaces involving soft materials like gel, rubber or human skin are of both fundamental and applied interest. Recent insights have been made into this field thanks to in situ observations of the contact interface. However, current soft-material-oriented tribometers enable only few degrees of freedom for the actuation of the contact, far from covering the richness of the loading conditions relevant to real tribological contacts. Here, we introduce an apparatus dedicated to the study of the contact mechanics and friction of soft materials which, in addition to in situ / in operando optical monitoring of the interface, enables simultaneous actuation along five degrees of freedom: three translations and two rotations. While all three translations feature large velocity/large stroke motion, the one responsible for normal contact loading can also apply high frequency/small amplitude vibrations. The contact's dynamical response is monitored using both a 6-axes force/torque sensor and a 6-axes displacement/rotation sensor. We first describe the structure of the apparatus, its implementation, alignment, calibration and resolutions. We then illustrate its capabilities through a series of experiments on elastomer contacts. Our apparatus will be useful to investigate the mechanics of a wide range of soft interfaces submitted to rich, tribology-relevant kinematic or dynamic stimuli.

physics.class-ph↗
arXiv2026

Sliding contact fraction in gravity-driven dense cohesionless granular flows

Using large-scale, three-dimensional discrete element simulations, we investigate the kinematic properties of granular chute flows of cohesionless grains, together with the evolution of the coordination number and the fraction of sliding contacts. Our results reveal that, under certain conditions, increasing the grain--grain friction coefficient leads to a decrease in the global dissipation of the system. This finding highlights that the overall dissipation is not solely governed by the energy lost during sliding contacts, but also by the probability that such contacts occur, a probability that decreases markedly as the friction coefficient increases. Together, these effects demonstrate the subtle and nontrivial interplay between grain-scale frictional interactions and macroscopic flow behavior in dense and cohesionless granular materials.

physics.class-ph↗
arXiv2026

Increase of the electromechanical coupling of piezoelectric vibration harvesters through lateral bars

To enhance the performance of vibration energy harvesters, it is essential to maximise the electromechanical coupling coefficient k${}^2$ of piezoelectric devices. This enables sufficient harvested power and tuning capability of the resonant frequency through electrical methods. While much literature treats the optimisation of piezoelectric cantilevers, the optimisation range is usually limited by the transverse coupling coefficient k31${}^2$ of the material. This work introduces an innovative solution to extend the optimisation range and increase the coupling coefficient of piezoelectric cantilevers. This is achieved by minimising lateral strain in the beam using lateral bars to maximise the equivalent material coupling coefficient. The theoretical basis of this innovation is demonstrated through the exploitation of the constitutive equations of piezoelectric materials. The interest of the addition of lateral bars to increase the coupling coefficient is demonstrated and studied with simulations based on the finite elements method. Finally, a proof of concept is realised using a aluminum cantilever prototype integrating a lead-free KNaNbO3 (KNN) piezoelectric material. It is tested under vibration at 0.1 m/s${}^2$ with variable resistive loads. The results show that the coupling coefficient increases by 30% and the relative frequency bandwidth by 32% with resistive tuning of the resonant frequency, by fixing eight steel bars to the cantilever. The designed prototype is a highly performant leadfree vibration energy harvester. It produces a maximum power of 49.9 $μ$W at resonance, and its normalised power density is equal to 16.5 mW/G${}^2$/cm${}^3$. Its relative frequency bandwidth is equal to 3.1%.

physics.class-ph↗